Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to use SRM Inclusion in MIDAS GTS NX

A

abrarnth

Student
Joined
Jun 12, 2025
Messages
4
so, I want to try to use this SRM Inclusion feature to review the Safety Factor on the slope section only, can anyone explain how to do it?

because while I was running analysis on my model, the Safety Factor results that I got were the Global Safety Factor values(?) not focused on the slope section only

I include my file in the attachment
 

Attachments

You must log in or register to reply here.

Similar threads

A
  • Question Question
Poor Element at MIDAS GTS NX
Replies
0
Views
5K
abrarnth
A
Z
  • Locked
  • Question Question
What is the maximum possible backfill angle or in other words If the backfill angle exceeds angle of friction, how to calculate lateral earth pressure
Replies
2
Views
2K
EireChch
EireChch
Blackfairy
  • Locked
  • Question Question
Pavement Design Question and What to look for Boring logs (California)
Replies
0
Views
2K
Blackfairy
Blackfairy
msf58
  • Locked
  • Question Question
Impervious Site needs to meet Pervious Pre-Development Conditions
Replies
1
Views
2K
eyeforgeotech
eyeforgeotech
S
  • Locked
  • Question Question
Is anybody good at AGTEK software to calculate the cut and fill volume of road project?
Replies
0
Views
2K
Sandeep32
S

Part and Inventory Search

Sponsor

Back
Top