Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to simulate impact force?

Status
Not open for further replies.
padan

padan

Mechanical
Joined
Jul 28, 2001
Messages
2
Location
US
I need to simulate a 12 ton impact force on a piece of metal for (shear strength.) Can I use a vertical slide hammer devise to do this? If so, how heavy should the slide hammer be and from what height should it be dropped from? Thanks.
 
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
gwalkerb
  • Locked
  • Question Question
A420 Gr WPL6 impact test temperature documentation & unit systems
Replies
5
Views
1K
gwalkerb
gwalkerb
qcrobert
  • Locked
  • Question Question
How can steel manufacturer chemical composition differ from ASTM/ASME chem comp?
Replies
5
Views
1K
qcrobert
qcrobert
Mike Mike
  • Locked
  • Question Question
Am I supposed to specify mortar type M, S, N, or O?
Replies
9
Views
3K
phamENG
phamENG
Surchi
  • Locked
  • Question Question
How do we check Hardness values for
Replies
3
Views
304
Surchi
Surchi

Part and Inventory Search

Sponsor

Back
Top