Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to rotate text/note in UG?

Status
Not open for further replies.
Juhler

Juhler

Mechanical
Joined
Mar 22, 2012
Messages
8
Location
DK
When working with drafting, I sometimes need to insert a note with some text.

I would like the ability to rotate the text 90 degrees, and not just making it vertical. Is this possible? I can not seem to find the option for it.

Thanks!

/Karsten
 
Sort by date Sort by votes
RMB on the text, goto Style in the tab Lettering you will find lettering angle, change 0 to 45 to 90 to ...

Best regards,

Michaël.

NX7.5.4.4 + TC Unified 8.3
Win 7 64 bit (Intel(R) Xeon(R) CPU X5650 @2.67GHz)
24.0 GB
NVIDIA Quadro 4000 + NVIDIA Tesla C2050

 
Upvote 0 Downvote
Thanks, can't believe I didn't see that :-)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

KKKing
  • Question Question
How to Chart Dim when using PMI dim in Sheet metal
Replies
0
Views
5K
KKKing
KKKing
Franklin M.
  • Locked
  • Question Question
How hard is it to move from UG to Catia?
Replies
2
Views
728
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
NX 2212 - How to hide centerlines in 2D views.....
Replies
2
Views
2K
CAD2015
CAD2015
Jashe
  • Question Question
How to create Radial Section Cut on NX Drawing
Replies
5
Views
11K
SDETERS
SDETERS
Barbio
  • Locked
  • Question Question
Weird middle click behaviour, can't pan or rotate.
Replies
1
Views
717
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top