Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to respect the original layer when exporting Flat Pattern in NX8.5

Status
Not open for further replies.
PSI-CAD

PSI-CAD

Computer
Feb 13, 2009
997
Hi,

My Flat Pattern entities are in layers 250 and 251 then I use export flat pattern

The results in AUTOCAD are in Layer 0 and 6 !!!

How to respect the original layers ?

Thanks in advance

Regards
Didier Psaltopoulos
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question
NX 2212 - How to hide centerlines in 2D views..... 1
Replies
2
Views
1K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question
Get to the part location from the tree................... 4
Replies
5
Views
5K
NXGeek
N
Jashe
  • Question
How to create Radial Section Cut on NX Drawing 1
Replies
5
Views
11K
SDETERS
SDETERS
nxprog
  • Question
Reuse assemblies in the Reuse Library
Replies
1
Views
3K
GigaManf
G
Kenja824
  • Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated

Part and Inventory Search

Sponsor

Back
Top Bottom