Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to represent Datum A is restricting only 2 degree of freedom, etc. Datum B, C in ISO GPS system

Status
Not open for further replies.
2020Learner

2020Learner

Automotive
Joined
Jun 27, 2021
Messages
19
Location
HK
Datum_Doubt_10-5-2022_tvjray.png


Hello Team,

From the picture inserted, I have a situation that i want to show next to datum A , or Datum B callout that Datum A or B is restricting only 2 or 3 or etc. Degrees of freedom in ISO GPS system.
Do we have any method in ISO GPS system to identify like that?
 
Status
Not open for further replies.

Similar threads

Mech1595
  • Locked
  • Question Question
ISO GPS - Position of Surface to Datum A
Replies
3
Views
2K
greenimi
greenimi
sendithard
  • Locked
  • Question Question
Inclined datum and degrees of freedom
Replies
9
Views
4K
Burunduk
Burunduk
Viper555
  • Question Question
Datum shift
Replies
8
Views
13K
3DDave
3DDave
Diametrix
  • Question Question
Hex hole as a datum feature
2
Replies
21
Views
22K
Burunduk
Burunduk
SDETERS
  • Locked
  • Question Question
Z Datum Average of 2 Points callout
Replies
8
Views
4K
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top