Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to print model mass on the screen

Status
Not open for further replies.
mckenzy

mckenzy

Mechanical
Joined
Sep 9, 2015
Messages
1
Location
RO
Hi,

I am solving a few models in ANSYS mechanical APDL and I need to print the mass of each model (sum of element mass) on the screen to be possible to copy it to elsewhere. How shall I proceed? I am using .db files.


regards,
mckenzy
 
Status
Not open for further replies.

Similar threads

andradesilva
  • Locked
  • Question Question
how to print on the screen or export the axial inertia moment of a model, in ANSYS Mechanical APDL
Replies
1
Views
598
gnc89
gnc89
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
2K
IJR
IJR
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top