Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to prepare Bridge Scour report

Status
Not open for further replies.

mehhsarh

Civil/Environmental
Joined
Jun 3, 2003
Messages
1
Location
US
I have used Hec-Ras program for Bridge Scour and came up with scour depths. If anyone has prepared scour report I need some feed back.
 
A lot of the US DOTs have hyraulic and Scour reports on thier websites - standardized forms.

Most Cities and Counties will happily accpet the State format as the usual funding breakdown includes both State and Federal monies. As such there is some type of cursory review by the State and FHWA.

I recall that you can find a complete listed of State DOTs on the FHWA website -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top