Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to plot only one think from assembly

Status
Not open for further replies.
simo7

simo7

Mechanical
Joined
Mar 21, 2006
Messages
5
Location
PL
Hi
I have model composed of some areas connected together-by CPINTF(made by shell99) and one area is lying on another. I would like to display (plot) results only for one area e.g. for area 2.
Thanks for any help.
 
Sort by date Sort by votes
This sounds easy enough...

ASEL,S,,, !Select Area(s)
ESLA,R !Select Elements Attached To Area(s)
/POST1 !Enter General Post-Processor (if not there already)
PLNSOL,,,,, !Plots Nodal Solution

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Sparky4598
  • Locked
  • Question Question
Static structural structural error plot
Replies
0
Views
2K
Sparky4598
Sparky4598
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
826
MihailW
M
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top