Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to model this type of nozzle in PVELITE

Status
Not open for further replies.

SmallInfo

Petroleum
Joined
Oct 30, 2017
Messages
104
Location
PK
Hi experts,
I am modelling a vessel which has a nozzle as shown in image, need guidance on how to model this type of nozzle shown at the bottom?
Thanks
Capture_igfjcc.jpg

Capture_eaabka.jpg
 
Hi CuMo, I am struggling in making davit arm in PV ELITE, can you please help again?
Thanks
Capture_fzhyat.jpg
 
Please, do not duplicate post.

Regards
 
PIP Standard drawing VEFV1119 Vessel Column Davit may be used, and no calculation is required.
I don´t know dimensions of your example.

Regards
 
This special davit may need hand calculations for the arm and support clips. See Dennis Moss design manual for guidelines. Also check weld strength and local stress on shell.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top