Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to model Dissolved O2 in Water using Hysys

Status
Not open for further replies.
Casimo5

Casimo5

Chemical
Joined
Nov 14, 2005
Messages
50
Location
US
I would like to model the amount of dissolved oxygen (DO) in water for the purpose of simulating a deoxygenation vacuum tower.

Can anyone tell me what the best fluid package to use for this?

 
Status
Not open for further replies.

Similar threads

adrich91
  • Locked
  • Question Question
How to interpret "pressure" in incompressible fluids pipes
Replies
6
Views
2K
adrich91
adrich91
engr2GW
  • Question Question
3 phase separator, oil bucket front and water weir at the same height
Replies
3
Views
736
LittleInch
LittleInch
Peter_Kim_niceman
  • Locked
  • Question Question
How to cool down liquid CO2 Tank
Replies
9
Views
1K
Peter_Kim_niceman
Peter_Kim_niceman
rika kose
  • Locked
  • Question Question
How to determine the max/min allowable working pressure
Replies
9
Views
970
rika kose
rika kose
Atari20
  • Locked
  • Question Question
CO2 filter in the vent opening of a Demineralized water storage tank
Replies
4
Views
1K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top