Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to model a guy-wire

Status
Not open for further replies.
flyforever85

flyforever85

New member
Joined
Jun 22, 2010
Messages
178
Location
US
How to model a guy-wire in ABAQUS? Should I use a connector?
 
Sort by date Sort by votes
I would use truss elements for that but connector is also an option.
 
Upvote 0 Downvote
Would the truss element work only in tension and be "lose" in compression? Same for connectors. Is there an option to select which direction of load would work for the wire?
 
Upvote 0 Downvote
Yes, for truss elements you can set "No compression" in material properties. In case of connector it's possible to specify uniaxial behavior in tensile direction only.

Spring elements are yet another option here.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro
W
  • Locked
  • Question Question
How to model print orientation effects in a 3D-printed tensile test without the AM plugin?
Replies
4
Views
2K
wahira
W
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
2
Views
4K
SWComposites
SWComposites
G
  • Locked
  • Question Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top