Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to measure wave speed in a material after impact?

Status
Not open for further replies.
sreekar

sreekar

Mechanical
Joined
Nov 20, 2007
Messages
6
Location
GB
Hi, I have modelled a solid cube to cube face impact and would like to know the speed of wave propagation through the material after impact?

I have tried plotting the velocity for nodal soltion under time histpro, but it seems to be give the value of the velocity at which the cube is moving at, not the pressure pulse through the material.

thanks!
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
832
MihailW
M
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR

Part and Inventory Search

Sponsor

Back
Top