Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to make contact

Status
Not open for further replies.

andrewcun

Petroleum
Joined
Jun 15, 2015
Messages
1
Location
CA
Dear All
My name is Andrew Cunningham., I have been in the Oil, Power and Fabrication industry since 1978. I am the author of the book “The Practical Guide to Ultrasonic Testing in the Real World”. I wrote the unique ultrasonic procedure for the “JETS” project UK, the sister project to the nuclear collider in Cern, Switzerland.
There is a 22% wastage in the fabrication industry and I have written the procedure to remove this wastage and took it to patent pending.
Patent # 14/621.173
Extending the working life of process piping by up to 22%.
Reducing the risk of pipe failure by up to 22%.
NO additional cost in manufacturing.
NO running costs.
My problem is, how do I get this in front of the decision makers?

Yours sincerely

Andrew Cunningham.
Andrew.cunningham@practical-ndt.com
 
Easy , you talk to pipe manufacturers. If they decline to take a serious look at your technology , perhaps the potential benefits are no where near as valuable as you believe them to be. Wouldnt be the first time an inventor / author/ salesman overestimated the benefits of their product
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top