tamingsari
Mechanical
im building a speaker type solar cooker using aluminium plate and i don't know the best way to join them i've tried to weld them with TRG GAS but it's really hard to do and i don't know how to join them together
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to join 2 mm aluminium plate
- Thread starter tamingsari
- Start date
- Status
tamingsari,
It is difficult to weld aluminium. You need an inert gas environment to do any electric welding. This should be done by a specialist in TIG/MIG welding.
Another way of connecting 2 plates of aluminium are bonding (maybe you need a special type if the temeperature gets too high) or riveting.
Using rivets is probably the easiest way.
Hope this was helpful,
Jelto
It is difficult to weld aluminium. You need an inert gas environment to do any electric welding. This should be done by a specialist in TIG/MIG welding.
Another way of connecting 2 plates of aluminium are bonding (maybe you need a special type if the temeperature gets too high) or riveting.
Using rivets is probably the easiest way.
Hope this was helpful,
Jelto
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question