Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to impose cylindrical material properties

Status
Not open for further replies.
Lucy1995

Lucy1995

Civil/Environmental
Joined
Jul 9, 2003
Messages
6
Location
US
I only can impose Cartesian material properties. How to do that?

Thanks advanced!
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
811
MihailW
M
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
andradesilva
  • Locked
  • Question Question
How to export to a text file results of analysis with material non-linearities, for all the substeps
Replies
0
Views
439
andradesilva
andradesilva

Part and Inventory Search

Sponsor

Back
Top