Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to find Cg from given info

Status
Not open for further replies.

subbuC3

Chemical
Joined
Feb 8, 2008
Messages
5
Location
US
I have given the Cv as 0.115 and Cg as 27,000 CFH at full cylinder. This is a fisher control valve. Upstream pressure is 500 psig and relief pressure is 425.7 psig. I am trying to find the maximum flow through the control valve. The flow medium is air with 5% Helium. I have a template to find the maximum flow rate. But i need the Cg as constant. Could you please somebody help me in converting the Cg to constant. Stonecold and other guys explained me but I haven't understand exactly.
Thanks in advance
 
See the other post I have made in the other thread.

I hope this helps. You have to make a guess of Cl given the data avaliable. The valve vendor may be able to assist you will accurate values for Cl that they have used. Some just use 30.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top