vesselguy
Petroleum
- Feb 25, 2002
- 386
I would appreciate any help in providing me with the method to solve my 2 problems. I would like to do a whole bunch of calculations inside an "if" statement but I can't figure out how to do it in MathCAD. An example, written in basic,is as follows,
if A = true then
D = pi*r^2/4
Beta = Gamma * D/k
C = 8*k*roh^2
etc...
else
D = pi*ro^2/4
Beta = W*H^4/2
K = .....
etc...
end if
How would you write this if statement in MathCAD? Can I handle this in one big if function?
Second question is, how do you handle a iterative set of calculations where you first take a guess at one number and then do a whole bunch of calcs. Then at the end of the calc you check for an approach tolerance and if not acceptable then send a calculated improved guess back to the beginning. I hope I'm clear on this.
Thanks in advance.
if A = true then
D = pi*r^2/4
Beta = Gamma * D/k
C = 8*k*roh^2
etc...
else
D = pi*ro^2/4
Beta = W*H^4/2
K = .....
etc...
end if
How would you write this if statement in MathCAD? Can I handle this in one big if function?
Second question is, how do you handle a iterative set of calculations where you first take a guess at one number and then do a whole bunch of calcs. Then at the end of the calc you check for an approach tolerance and if not acceptable then send a calculated improved guess back to the beginning. I hope I'm clear on this.
Thanks in advance.