Mar 17, 2003 #1 dutch7777 Mechanical Joined Nov 8, 2001 Messages 175 Location US Is there one hidden in annotations somewhere, or do I create one from scratch...any help appreciated.
Is there one hidden in annotations somewhere, or do I create one from scratch...any help appreciated.
Mar 17, 2003 #2 SBaugh Mechanical Joined Mar 6, 2001 Messages 6,691 Location US I assume you want this for a dimension. edit the properties of a dimension\ then click on modify text\add symbol\pick the library "geometric tolerancing"\ perpendicularity Walla a perpindicular symbol. If its for annotations type in the text except for the symbol. Then once its in edit the properties of the annotations and follow the path above. Scott Baugh, CSWP 3DVision Technologies http://www.3dvisiontech.comhttp://www.3dmca.comfaq731-376 When in doubt, always check the help Upvote 0 Downvote
I assume you want this for a dimension. edit the properties of a dimension\ then click on modify text\add symbol\pick the library "geometric tolerancing"\ perpendicularity Walla a perpindicular symbol. If its for annotations type in the text except for the symbol. Then once its in edit the properties of the annotations and follow the path above. Scott Baugh, CSWP 3DVision Technologies http://www.3dvisiontech.comhttp://www.3dmca.comfaq731-376 When in doubt, always check the help
Mar 17, 2003 Thread starter #3 dutch7777 Mechanical Joined Nov 8, 2001 Messages 175 Location US Thanx Scott, Right under my nose as anticipated...rock on bro... Upvote 0 Downvote