Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to create perpendicularity symbol...???
- Thread starter dutch7777
- Start date
I assume you want this for a dimension.
edit the properties of a dimension\ then click on modify text\add symbol\pick the library "geometric tolerancing"\ perpendicularity
Walla a perpindicular symbol.
If its for annotations type in the text except for the symbol. Then once its in edit the properties of the annotations and follow the path above.
Scott Baugh, CSWP![[spin]](/data/assets/smilies/spin.gif "[spin] [spin]")
![[americanflag]](/data/assets/smilies/americanflag.gif "[americanflag] [americanflag]")
3DVision Technologies
faq731-376
When in doubt, always check the help
edit the properties of a dimension\ then click on modify text\add symbol\pick the library "geometric tolerancing"\ perpendicularity
Walla a perpindicular symbol.
If its for annotations type in the text except for the symbol. Then once its in edit the properties of the annotations and follow the path above.
Scott Baugh, CSWP
3DVision Technologies
faq731-376
When in doubt, always check the help
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question