Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to convert SLDASM file into NX Part File

Status
Not open for further replies.
shanghongcao

shanghongcao

Mechanical
Joined
Sep 27, 2012
Messages
30
Location
DE
How to convert SLDASM file into NX part file? There is always some error when I open the file directly in NX. This file is quite large. It cannot be uploaded here. please download it from my Dropbox.
 
Sort by date Sort by votes
I looked at your data, in nx8 I cold not read the big frame, tried in ST4, ST5 everything works fine. call report GTAC
regards

 
Upvote 0 Downvote
Thank you, Uwam2ie
Unfortunately I don't have ST4 or ST5 available. Can you please upload the file and let me share it after you convert it into NX part file? Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015
gurucallie
  • Locked
  • Question Question
Embed an EXcel file into NX 2027 so the file drives a model and stays with the model file
Replies
3
Views
3K
cowski
cowski
CAD2015
  • Locked
  • Question Question
Converting a PDF document to CGM file in NX.......................
Replies
2
Views
2K
CAD2015
CAD2015
alj722
  • Locked
  • Question Question
NX Journal - Cylinders from CSV File
Replies
3
Views
2K
alj722
alj722
GiantIsopod
  • Question Question
Put NX Expressions into Excel
Replies
2
Views
5K
DaveFig
D

Part and Inventory Search

Sponsor

Back
Top