Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to convert combined cases to unit cases

Status
Not open for further replies.
suslu13

suslu13

Mechanical
Joined
Apr 22, 2018
Messages
17
Location
TR
Hi all

I have some unit load cases, then with some coefficient i convert it to the combined load cases.

I apply this forces to the constant mpc points.

Is there any way to convert combined cases to a unit load cases.

If i export applied forces from mpc with using Hypermesh, will i get the correct results.

Regards
 
Status
Not open for further replies.

Similar threads

Giang123
  • Locked
  • Question Question
SWITCH FROM GLOBAL MODE TO LOCAL MODE IN MSC NASTRAN
Replies
2
Views
564
BlasMolero
BlasMolero
A
  • Question Question
can we output Topology Optimization Element Density Distribution in the op2 itself
Replies
0
Views
2K
abhishek33
A
davidbl1419
  • Locked
  • Question Question
How to get Clalpha and Cmalpha?
Replies
0
Views
141
davidbl1419
davidbl1419
Gaganaut06
  • Locked
  • Question Question
Improving rigid body mode magnitude to 1e-6 or better
Replies
18
Views
2K
rb1957
rb1957
Alberto94
  • Locked
  • Question Question
Unit enforced displacement and rotation validity check
Replies
2
Views
613
Alberto94
Alberto94

Part and Inventory Search

Sponsor

Back
Top