Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to connect/add an end plate with steel box beam

Status
Not open for further replies.
Syedshah80

Syedshah80

Civil/Environmental
Joined
Sep 30, 2013
Messages
3
Location
MY
Hello,

Please help me by telling step by step procedure for how to add/connect/draw an end plate with 60mmx120mmx10mm with an already modelled sheel box beam. I shall be thankful for a step by step procedure.
 
Status
Not open for further replies.

Similar threads

AACING
  • Locked
  • Question Question
Methods to add rotation dof to solid with ABAQUS, MSC NASTRAN and SAMCEF
Replies
3
Views
2K
GVDR
G
JoeCK
  • Locked
  • Question Question
Slab to beam connection
Replies
0
Views
637
JoeCK
JoeCK
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
4
Views
7K
rb1957
rb1957
netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top