Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to connect a beam to shell surface

Status
Not open for further replies.
zhanshenjing

zhanshenjing

Automotive
Nov 10, 2012
19
I am modeling a spot weld, but has some difficulty in connecting two parts (beam and shell) together, is there any good advice?
 
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
Gardenfence
  • Locked
  • Question
How to excite a beam through a spring?
Replies
3
Views
311
FEA way
FEA way
zenzizenzizenzic
  • Question
How to find ultimate strength and fracture sequence of bolted connections to thin-walledcarbon steel
Replies
2
Views
2K
zenzizenzizenzic
zenzizenzizenzic
M
  • Locked
  • Question
How to get output in abaqus?
Replies
5
Views
4K
FEA way
FEA way
G
  • Locked
  • Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom