I’ve made an assy of a skid, I’ve used the frame function. The part list is working excellent. The problem is that I need individual drawings of each component the frame function has generated. The way I do this today is to save each component and then I have to generate the drawing from that part files. I don’t think that this is the right way to do it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How can I get drawings of parts made in Frame?
- Thread starter RAMviking
- Start date
- Thread starter
- #3
- Thread starter
- #5
fredericmenage
Mechanical
Hi,
You can also make a drawing based on the asm file and show only the frame member you are interested in : Model display setting before view creation or RMB/Properties after; then 'display' tab : select all the frame members and unchek 'show' then select the one you want (the button with glasses will help your selection by highlighting the selected part on the view) and click 'show'.
This way, your view shows only that piece of the frame. If you create other views with 'principal view', they will inherit the same display settings.
Fred
You can also make a drawing based on the asm file and show only the frame member you are interested in : Model display setting before view creation or RMB/Properties after; then 'display' tab : select all the frame members and unchek 'show' then select the one you want (the button with glasses will help your selection by highlighting the selected part on the view) and click 'show'.
This way, your view shows only that piece of the frame. If you create other views with 'principal view', they will inherit the same display settings.
Fred
- Status
Similar threads
- Locked
- Question
- Locked
- Question