Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Honeycomb Isothermal analysis shows Thermal stress on Face sheets

Status
Not open for further replies.
kishain

kishain

Aerospace
Sep 21, 2010
1

Hi
I am modelling a honeycomb structure using solid elements with (MAT9)and specified appropriate values for G33 (Ezz), G55 (Gyz), and G66 (Gzx). The facesheets are modelled using shell with Mat 8 cards. The structure is having a Wedge shape and after doing a Iso thermal analysis I am getting some stress (~5MPa) in the shell elements. What could be the reason??

Manuy Thanks

KP
 
Status
Not open for further replies.

Similar threads

T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
245
SWComposites
SWComposites
oharag11
  • Locked
  • Question
Modeling/simulating thermal vias - PCB/Electonic thermal analysis?
Replies
0
Views
648
oharag11
oharag11
Stress_Eng
  • Question
FEM Contact Analysis Variables
Replies
17
Views
12K
Stress_Eng
Stress_Eng
bugbus
  • Locked
  • Question
A few questions on stress concentrations, yielding, strains, etc. 1
Replies
6
Views
722
bugbus
bugbus
rb1957
  • Locked
  • Question
composite stress analysis ?
Replies
2
Views
308
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top Bottom