Hole Callout’s “Pattern Feature Count”; is it working?

[MFDO]

In Drafting, I’m unable to get the number of holes (Hole quantity) in the Hole Callouts as intended in the Customer Defaults.

Michael Fernando (CSWE)

http://www.solidCADworks.com

Tool and Die Designer
Siemens NX V9.0 + PDW
SWX 2013 SP3.0 X64
PDMWorks 2013
Logopress3
FastForm Advance
FormatWorks

 

[cowski]

Were the other answers not helpful?

http://community.plm.automation.sie...eature-Count-is-it-working/m-p/293301#U293301

www.nxjournaling.com

 

[MFDO]

It was typed here first, but missed to Submit.

I posted it later assuming there are more user participating here, in this forum.

Michael Fernando (CSWE)

http://www.solidCADworks.com

Tool and Die Designer
Siemens NX V9.0 + PDW
SWX 2013 SP3.0 X64
PDMWorks 2013
Logopress3
FastForm Advance
FormatWorks

 

[JohnRBaker]

Irrespective of the "user participation", I suspect that you've already gotten all the responses that you really need on the Community site.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[MFDO]

Sorry John, still I’m not quite understood the process to make it work easily. I will stick to the other forum for further discussions.

Michael Fernando (CSWE)

http://www.solidCADworks.com

Tool and Die Designer
Siemens NX V9.0 + PDW
SWX 2013 SP3.0 X64
PDMWorks 2013
Logopress3
FastForm Advance
FormatWorks

 

[JohnRBaker]

I can't see how any of us who have responded could make it any clearer. If you've done what we've suggested and it's still not working, then please call GTAC as there's something wrong with your model and/or Drawing.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[MFDO]

Hope Eng-Tips community have access to the Siemens NX forum to see the ongoing discussion and make some valued contribution of their thoughts too.

Michael Fernando (CSWE)

http://www.solidCADworks.com

Tool and Die Designer
Siemens NX V9.0 + PDW
SWX 2013 SP3.0 X64
PDMWorks 2013
Logopress3
FastForm Advance
FormatWorks

 

[JohnRBaker]

Since ANYONE can be a registered member of and post on the Siemens PLM Community site, that should not be an issue.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.