Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
High Temp. UT Inspection
- Thread starter OSUWE2010
- Start date
To my knowledge there are no high temperature limitations on ASNT UT certifications. There are obvious technique limitations and it must be recognized by the technician that the ultrasonic waves do not act the same under high temperatures as at ambient. Further, the machine calibration must be done to the temperatures used in testing...I doubt that the NDT company will want their expensive IIW or DSC calibration blocks heated up to high temperatures.
- Status
Similar threads
