Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

High pressure (water/steam) engine washer

Status
Not open for further replies.

madvb

Mechanical
Dec 16, 2002
41
Does anyone know where I can find the requirements/codes regarding putting a couple of high pressure (water/steam) engine washers in an autoshop? What would the autoshop need to have in order to accomodate these engine washers?... special drainage system?

Thanks in advance.
 
Replies continue below

Recommended for you

Here is the website for oldest steam cleaner manufacturers in the business. There are quite a number of companies that make this type machine.
We used the Jenny brand with great sucess and parts and information were always available. There website is a good starting point.



 
I forgot to add is that you need to check with the local authorities on waste disposal. All manufacturers can help you with this aspect of the installation.

Check all the codes and get permits up front they are a lot cheaper than a fine for violation.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor