Nov 29, 2016 #1 treatwater Chemical Jan 5, 2011 11 Hi, I've seen this mark (CG) on equipments. what does it mean?
Nov 29, 2016 1 #2 LittleInch Petroleum Mar 27, 2013 22,596 My guess would go for Centre of Gravity. Remember - More details = better answers Also: If you get a response it's polite to respond to it. Upvote 0 Downvote
My guess would go for Centre of Gravity. Remember - More details = better answers Also: If you get a response it's polite to respond to it.
Nov 29, 2016 #5 chicopee Mechanical Feb 15, 2003 6,199 The circle with two adjacent quadrants blanked out is a typical symbol for center of gravity. Such symbol is found in rigging manuals. Upvote 0 Downvote
The circle with two adjacent quadrants blanked out is a typical symbol for center of gravity. Such symbol is found in rigging manuals.
Nov 29, 2016 #6 DSB123 Mechanical May 16, 2002 1,288 Note there should be similar symbols on two of the other surfaces since you need the dimensions in three perpendicular planes to get the exact C of G. Upvote 0 Downvote
Note there should be similar symbols on two of the other surfaces since you need the dimensions in three perpendicular planes to get the exact C of G.
![URL]](https://res.cloudinary.com/engtips/image/fetch/w_800,c_lfill,q_auto,f_auto,g_faces:center/[URL unfurl="true"]http://uupload.ir/files/v5q_cg.jpg[/URL])
