Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

hi can any one do it

Status
Not open for further replies.

humanfly2009

Mechanical
Joined
May 11, 2009
Messages
3
Location
CA
Hi Guys

Here I attached a jpg pic. Can any one doit. If you can plz let me know how to do. I am trying but faceing proble.
Thanks
 
Here is an NX 5.0 example where if you open the Part Navigator and expand the list of User Expressions, you can edit the 'Outside Diameter', 'Inside Diameter', 'Washer Thickness' and 'Material Thickness'.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA

To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top