Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hey TD2K, where are ya?

Status
Not open for further replies.
KernOily

KernOily

Petroleum
Joined
Jan 29, 2002
Messages
711
Location
US

Hey TD2K - email me please at pjchandl@prou.com when you get a minute. Thanks!
Pete
P. J. (Pete) Chandler, PE
Principal Engineer
Mechanical, Piping, Thermal, Hydraulics
Processes Unlimited International, Inc.
Bakersfield, California USA
pjchandl@prou.com
 
Sort by date Sort by votes
Hi Pete, emailed you from my yahoo account, let me know if it didn't come through.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Question Question
Maximum friction losses are 5% in pipes. Who said it first?
Replies
9
Views
3K
bimr
bimr
bizkitgto
  • Question Question
When would piping need to be replaced due to an overpressure event where the Yield Stress was exceeded?
Replies
15
Views
10K
GD2
GD2
Sammule
  • Locked
  • Question Question
What are the differences between the Flexibility methods of ASME, API 650, WRC-297 (Bijilaard), and Spherical for Puzzle?
Replies
0
Views
932
Sammule
Sammule
Rodger Furey
  • Locked
  • Question Question
Pilot operated solenoid valves (2 way) - what happens after they are open?
Replies
10
Views
1K
Snickster
Snickster
jpild
  • Locked
  • Question Question
where to get an old version of NACE (2002 or circa) for free
Replies
4
Views
357
DekDee
DekDee

Part and Inventory Search

Sponsor

Back
Top