Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hey TD2K, where are ya?

Status
Not open for further replies.
KernOily

KernOily

Petroleum
Jan 29, 2002
711

Hey TD2K - email me please at pjchandl@prou.com when you get a minute. Thanks!
Pete
P. J. (Pete) Chandler, PE
Principal Engineer
Mechanical, Piping, Thermal, Hydraulics
Processes Unlimited International, Inc.
Bakersfield, California USA
pjchandl@prou.com
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Hi Pete, emailed you from my yahoo account, let me know if it didn't come through.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Question
Maximum friction losses are 5% in pipes. Who said it first?
Replies
9
Views
3K
bimr
bimr
bizkitgto
  • Question
When would piping need to be replaced due to an overpressure event where the Yield Stress was exceeded?
Replies
15
Views
10K
GD2
GD2
Sammule
  • Question
What are the differences between the Flexibility methods of ASME, API 650, WRC-297 (Bijilaard), and Spherical for Puzzle?
Replies
0
Views
864
Sammule
Sammule
Rodger Furey
  • Locked
  • Question
Pilot operated solenoid valves (2 way) - what happens after they are open?
Replies
10
Views
876
Snickster
Snickster
jpild
  • Locked
  • Question
where to get an old version of NACE (2002 or circa) for free
Replies
4
Views
272
DekDee
DekDee

Part and Inventory Search

Sponsor

Back
Top Bottom