Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with press fitting two die cast parts 1

Status
Not open for further replies.
mrschwee

mrschwee

Mechanical
Joined
Feb 5, 2002
Messages
1
Location
US
I need to find a good source on press fitting two metal die cast parts together. Or any info you have on press fitting in general.
More specifically how much radial inferference causes how much pressure on the contact surfaces?

Thanks,
-M
 
Sort by date Sort by votes
M

BS4500: ISO limits and fits.

"Mechanicas of Engineering Materials" by Benham & Crawford has a section on stresses set up by a shrink fit assembly.

Greg
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Y
  • Locked
  • Question Question
A extremely thin layer of adhesive between two steel plate with the pressure by Abaqus
Replies
0
Views
951
Yao Lingbo
Y
Spike2000
  • Question Question
tig welding tubing, fitting face perpendicular to tubing
Replies
14
Views
7K
Tmoose
Tmoose
EmpiricalEngineer
  • Locked
  • Question Question
Looking for some help
Replies
1
Views
386
MintJulep
M
KVARM
  • Locked
  • Question Question
Aluminium Honeycomb Panel with Aluminium Extrusion Welding
Replies
4
Views
2K
kingnero
kingnero
MJCronin
  • Locked
  • Question Question
Quality of Welded fabrication from Transylvania - Can you help me ?
Replies
6
Views
846
dgeesaman
dgeesaman

Part and Inventory Search

Sponsor

Back
Top