Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help on initial and final set times 3

Status
Not open for further replies.
nugent01

nugent01

Materials
Joined
Dec 14, 2004
Messages
1
Location
US
Im looking for any kind of information on initial and final set of concrete..I realize this varies from mix to mix but are there any standard times you can reference?

Thanks...
 
Sort by date Sort by votes
Look at "Design and Control of Concrete Mixtures" by PCA. It depends on temperature, design mix , etc.
 
Upvote 0 Downvote
Here are some online resouces (free .pdf downloads)

ftp://imgs.ebuild.com/woc/C00I046.pdf
ftp://imgs.ebuild.com/woc/C99G029.pdf
ftp://imgs.ebuild.com/woc/C970011.pdf
ftp://imgs.ebuild.com/woc/C920523.pdf
ftp://imgs.ebuild.com/woc/C920126.pdf
ftp://imgs.ebuild.com/woc/c900541.pdf
ftp://imgs.ebuild.com/woc/c900287.pdf
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AKSherpa
  • Question Question
Alkalai-Silica Reactivity - Concrete Slab on Grade "Contact with Moist Ground"
Replies
0
Views
2K
AKSherpa
AKSherpa
S
  • Locked
  • Question Question
How to Design RC Pier under high lateral and tension load (CSA Standards)
Replies
1
Views
2K
bugbus
bugbus
jkimmerling
  • Locked
  • Question Question
Question on Concrete roof span
Replies
3
Views
2K
FacEngrPE
FacEngrPE
ll616938808
  • Locked
  • Question Question
Does anyone understand the meaning of 40mm and 20mm in this snap of AS 1012?
Replies
1
Views
2K
bugbus
bugbus
jbro2
  • Locked
  • Question Question
Looking for a solution in NZ for concrete in high heat, steam and low ph.
Replies
3
Views
2K
dik
dik

Part and Inventory Search

Sponsor

Back
Top