Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help needed with Mitchell Geometry programme

Status
Not open for further replies.

andyl999

Computer
Joined
Jul 7, 2005
Messages
1
Location
GB
I have a legitimate copy of Geometry (ver 5.01) written by the late great William C Mitchell Link.

I am having a very "senior" moment and need some help. I have a racecar which I think has a rear suspension geometry problem, hence I bought this software. I have read all the help files and I still cannot solve my dilemma.

I fire up Geometry and files/open/pushdemometris.gem, this draws a front up on the screen then I go rear/open/pushdemometric.gem, and yes a rear appears below.

Now I want to start to edit the rear suspension to change the X,Y and Z points so I go to files/edit geometry and it does not give me a choice of front or rear and defaults to edit the front.

Having experimented and used "load demo files box" at startup and selected "Front and rear formula car" now I go to files/edit geometry and hey presto I get a choice of front or rear.

Does another (Mitchell)user know what I am doing wrong?

Perhaps it's time for a self help group :0)
 
I cannot help you on that one, If your problem is not "rocker linkage related" you might want to check out an alternative:
Cheers,
Dynatune
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top