Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HELP needed-RPS(reference point system) and Control Points

Status
Not open for further replies.
sunny5345

sunny5345

Automotive
Joined
Oct 2, 2015
Messages
3
Location
IN
Could anybody please explain me about RPS and Control Points? and if this topic is already discusses in here, am sorry and please guide me to the page. i searched few pages and could not find anything.
Thanks in advance.

Cheers

Sunil
 
Status
Not open for further replies.

Similar threads

Auxcron1
  • Locked
  • Question Question
Reference Point System
2
Replies
38
Views
2K
pmarc
pmarc
greenimi
  • Question Question
Localized area(s) that do not contain opposed points
Replies
2
Views
490
Burunduk
Burunduk
J
  • Question Question
FoS perp, flat and parallel help
Replies
7
Views
994
3DDave
3DDave
SDETERS
  • Locked
  • Question Question
Z Datum Average of 2 Points callout
Replies
8
Views
4K
mfgenggear
mfgenggear
L
  • Question Question
Y14.5-2009: Surf. Profile Control; combined with a position control
Replies
8
Views
13K
pmarc
pmarc

Part and Inventory Search

Sponsor

Back
Top