Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

help determining root cause

Status
Not open for further replies.

jumacao

Chemical
Dec 26, 2008
41
Inside a chamber the acceptable range is 45 C to 55 C. During one run it was recorded 44.9 C. The instrument tolerance is 1 C. Last year the same chamber fail becasue over temperature. No other failure observe in any other machines. The chamber is an ETO sterilizer.

What could be root cause for the 44.9 C value obtained?

 
Replies continue below

Recommended for you

Is this the same question you asked last time?

thread135-245808


----------------------------------
image.php

If we learn from our mistakes I'm getting a great education!
 
Have you done any analysis on your own? Why don't you ask your manufacturer?

TTFN

FAQ731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor