Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hello All, Has anyone got this fat
- Thread starter CADQUEEN
- Start date
yes i have been getting "fat", need bigger pants since moving inside from the field. does it happen every time you try to print? or just now and then. anyway close everything
shut down then try again. as long as you don't "crash" autocad and lose objects & time, this is just one of those computer things, good thing they don't make cars or you would have to pull of the road and stop your engine then wait to re-start.
hope this helps
Intel 1.7 GHZ
Win 2000 Pro
768 RDRAM
Autocad 14, 2002
Eagle Point 2.4.0 (better than current)
shut down then try again. as long as you don't "crash" autocad and lose objects & time, this is just one of those computer things, good thing they don't make cars or you would have to pull of the road and stop your engine then wait to re-start.
hope this helps
Intel 1.7 GHZ
Win 2000 Pro
768 RDRAM
Autocad 14, 2002
Eagle Point 2.4.0 (better than current)
- Thread starter
- #3
Can't be sure, but you may check service pack or plotting patch. Here is a link to some more recent patches from Autodesk.
"Whether you think that you can, or that you can't, you are usually right "
.. Henry Ford
"Whether you think that you can, or that you can't, you are usually right "
.. Henry Ford
- Status
Similar threads
- arastf
- Autodesk: AutoCAD
- Locked
- Question