Hello All, Has anyone got this fat

[CADQUEEN]

Hello All,
Has anyone got this fatal error when plotting

FATAL ERROR: Unhandled Access Violation Reading 0x0004 Exception at 1c893700h
Any help would be greatly appriciated!
Thanks,
Cassy

 

[OZZY84]

yes i have been getting "fat", need bigger pants since moving inside from the field. does it happen every time you try to print? or just now and then. anyway close everything
shut down then try again. as long as you don't "crash" autocad and lose objects & time, this is just one of those computer things, good thing they don't make cars or you would have to pull of the road and stop your engine then wait to re-start.

hope this helps

Intel 1.7 GHZ
Win 2000 Pro
768 RDRAM
Autocad 14, 2002
Eagle Point 2.4.0 (better than current)

 

[CADQUEEN]

tried that...but thanks

 

[borgunit]

Can't be sure, but you may check service pack or plotting patch. Here is a link to some more recent patches from Autodesk.

http://usa.autodesk.com/adsk/servlet/ps/dl/index?siteID=123112&id=2334435&linkID=2475161

"Whether you think that you can, or that you can't, you are usually right "
.. Henry Ford