VictorMeldrew
Mechanical
A customer has requested we Heat treat 17-4 PH to specification CHTS 41.11-12.
Does anyone know what this spec is?
Does anyone know what this spec is?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Heat treatment of 17-4 PH
- Thread starter VictorMeldrew
- Start date
- Status
That's got to be a company specification, so only your customer can tell you for sure. I'd suggest you make a counter-offer, and go back to them with say, AMS 2759/3. They'll have to choose a condition, of course; if they can't do that, suggest H1025, which is likely the most common.
Good luck!
Good luck!
- Thread starter
- #3
- Status
Similar threads
- Question
- Question
