Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Heat Treatment for AC2B
- Thread starter Salvatio
- Start date
The AC2B aluminum alloy designation is listed under Japanese Casting specification KSD 6008. A cross reference with this casting specification indicates the AC2B is an AA 319 Aluminum alloy casting - F or T6.
The AA 319 can be sand cast or permanent mold cast. There are three strength levels based on tempers offered by some foundries;
AA 319 -F as cast, lowest strength ~ 27 ksi min UTS
AA 319 - T5 ~30 Ksi min UTS
AA 319 - T6 ~36 Ksi min UTS
The AA 319 can be sand cast or permanent mold cast. There are three strength levels based on tempers offered by some foundries;
AA 319 -F as cast, lowest strength ~ 27 ksi min UTS
AA 319 - T5 ~30 Ksi min UTS
AA 319 - T6 ~36 Ksi min UTS
- Status
Similar threads
- Question
- Question
- Locked
- Question