Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Heat of Hydration 1
- Thread starter magee913
- Start date
concretemasonry
Structural
What size of concrete pour?
What type of cement (Type I or Type III Portland) and what pozzolanics/ash and admixtures?
Temperature of the concrete when placed?
Method and time of curing?
Too many different factors for a one sentence question.
Dick
Engineer and international traveler interested in construction techniques, problems and proper design.
What type of cement (Type I or Type III Portland) and what pozzolanics/ash and admixtures?
Temperature of the concrete when placed?
Method and time of curing?
Too many different factors for a one sentence question.
Dick
Engineer and international traveler interested in construction techniques, problems and proper design.
-
1
- #3
There is a description with explanation on
EM 1110-2-542 Engineering and design. Thermal Studies of mass concrete structures. USACE (free internet download)
ACI 207.1 Mass concrete (here it is a simple method proposed by Schmidt)
Like concretemasonry and you can verify with this references, temperature goes over many factors
ajose
EM 1110-2-542 Engineering and design. Thermal Studies of mass concrete structures. USACE (free internet download)
ACI 207.1 Mass concrete (here it is a simple method proposed by Schmidt)
Like concretemasonry and you can verify with this references, temperature goes over many factors
ajose
- Status
Similar threads
- Locked
- Question
- Question
- Question