Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Heat Exchanger suggestion for silicone polyester thermoset coatings

Status
Not open for further replies.

datechguy

Materials
Oct 10, 2000
5
I'm looking for a heat exchanger to control viscosity through temperature. My concerns are solvent evaporation and resin system degradation.
Any suggestion would greatly be appreciated.

 
Replies continue below

Recommended for you

Hello,

Without knowing anything about your process, I would propose a closed vessel with a heating or cooling coil as requirements dictate, and with an agitator to help keep temperature variations of the material you are trying to control within the vessel to a minimum.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor