Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
hastelloy - machining
- Thread starter dorin
- Start date
Dorin
Have you tried contacting Haynes alloys? Take a look at
Best of luck
Chris
Have you tried contacting Haynes alloys? Take a look at
Best of luck
Chris
gunnarhole
Mechanical
Dorin,
Try the following site.
This is the old INCO machining bulletin. You will want to keep in mind that these guys call alloys like B-2 and C-276 Inconel instead of Hastelloy.
Regards,
Gunnar
Try the following site.
This is the old INCO machining bulletin. You will want to keep in mind that these guys call alloys like B-2 and C-276 Inconel instead of Hastelloy.
Regards,
Gunnar
- Status
Similar threads