Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

harness covering products?

Status
Not open for further replies.

workinonit

Electrical
Joined
Mar 28, 2012
Messages
4
Location
US
Just need a little advice here. Think I posted this prior in wrong area

I'm already using a Coroplast 1238X on some applications.

Are there any harness covering products... braid, conduit, tape... that will withstand 150 C temps?
 
I've seen Teflon Spiral Wrap rated to 260 deg C
Are your harness wires rated that high?

Are you just looking for abrasion protection or thermal shielding/protection,etc..
 
thanks for your reply

I'm looking for thermal shielding in an engine compartment. 150+ C should be sufficient for my application.

The wires are not rated for 260 deg C, I'm going to try a CoroPlast 1238x tape which is rated for 150 deg C. I believe that should be enough for the application, so I was just wondering about alternatives.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top