Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cable harness diameter in Siemens NX 10

Status
Not open for further replies.

IvanNX

Mechanical
Jun 9, 2005
267
Hello,

I need to calculate what is a diameter of cable harness (lot of cables that are bundled together, I had to google out this term so I am not sure if it is correct one), using Siemens NX. I read on internet that NX can do it, but I can not find out how to do it.
Can anybody help me, please?

_____________________________
Enjoy your work and have fun!
 
Replies continue below

Recommended for you

Same question hangs on NX forum for a few days, but it look like there is no routing application users there, so I posted same question here with hope that I will have more luck. We have harnesses of 200 to 500 cables, and that changes from project to project. It is optical fibers that we use so we need as accurate as possible solution.

_____________________________
Enjoy your work and have fun!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor