When using a telebrineller it is recommended that the bar hardness be within 30 BHN of the expected material hardness. If there is a difference of 60 BHN between the bar and the test results would you expect the actual hardness of the material to be higher or lower than the test results?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hardness Testing
- Thread starter QC1971
- Start date
Similar threads
- Question
- Question
