Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hammer Beam Truss 2
- Thread starter Lion06
- Start date
woodman88
Structural
- Oct 23, 2009
- 1,020
Here is what has been answered about this before.
thread337-273265
Garth Dreger PE - AZ Phoenix area
As EOR's we should take the responsibility to design our structures to support the components we allow in our design per that industry standards.
thread337-273265
Garth Dreger PE - AZ Phoenix area
As EOR's we should take the responsibility to design our structures to support the components we allow in our design per that industry standards.
-
1
- #3
Download the pdf from
with plenty info on the trusses and their way of working. Of course no substitute for any modern analysis tool, but great to start.
In Acrobat, use F3 or Ctrl-F to open a search for the Hammer Beam Truss words.
with plenty info on the trusses and their way of working. Of course no substitute for any modern analysis tool, but great to start.
In Acrobat, use F3 or Ctrl-F to open a search for the Hammer Beam Truss words.
-
1
- #4
msquared48
Structural
I understand there is a log of information on the International Blacksmith website too...
Mike McCann
MMC Engineering
Mike McCann
MMC Engineering
- Thread starter
- #5
msquared48
Structural
![[bigsmile]](/data/assets/smilies/bigsmile.gif "[bigsmile] [bigsmile]")
- Status
Similar threads
