Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Greetings to everyone. At present,

Status
Not open for further replies.
suren12564

suren12564

Mechanical
Joined
Aug 16, 2015
Messages
30
Location
IN
Greetings to everyone.
At present, I am evaluating Steam turbine piping loads as per NEMA S23.
The analysis is being done by using CEASAR II Software. I do not have past experience in dealing with steam turbines. I am seeking guidance from the subject experts regarding how to model the steam turbine in CEASAR II. I am attaching the Turbine drawing for reference.
Thanks in advance. The prompt response is appreciated.

 
 https://files.engineering.com/getfile.aspx?folder=76aedd00-a128-42fa-a3c3-a760bdcb6ec0&file=GA_DRG._CW_Pump.pdf
Status
Not open for further replies.

Similar threads

jseag
  • Question Question
When to utilize Caesar's liberal stress allowables?
Replies
3
Views
7K
StressGuy
StressGuy
TomoB
  • Locked
  • Question Question
Modeling fittings acc. to ASME B16.11
Replies
2
Views
2K
TomoB
TomoB
TG004
  • Locked
  • Question Question
What is the recommended method to m
Replies
0
Views
1K
TG004
TG004
madl_07
  • Locked
  • Question Question
ASME B31.1 Weld Joint Efficiency, why is Caesar II dividing the weld eff to stress allowable?
Replies
0
Views
975
madl_07
madl_07
SmallInfo
  • Locked
  • Question Question
How to Control Nozzle Loads?
Replies
1
Views
653
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top