Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

GPost & Trap Doors for Apelio Punch/Laser Combo

  • Thread starter Thread starter jcoleman
  • Start date Start date
Status
Not open for further replies.
J

jcoleman

Guest
Good Afternoon! Has anyone here created a post processor for an Apelio 367. If so, how did you handle the execution of a trap door?



Thanks!

John
 
v2001, if you are referring to Pro.



Thanks!
 
Please don't forget me. We have a consultant coming in next week to make some corrections to our post. I'm hoping to provide him with a better idea of executing the trap door.

Thanks!

John
 
Status
Not open for further replies.

Similar threads

oharag11
  • Locked
  • Question Question
Reassign 0-0 for Ordinate Sims - CREO 10
Replies
8
Views
2K
3DDave
3DDave
Milan Martikan
  • Locked
  • Question Question
NWF file generator for facilitating routing in PTC Creo Cabling
Replies
0
Views
1K
Milan Martikan
Milan Martikan
PhilKa
  • Locked
  • Question Question
Creo Macro for Supressing Features
Replies
1
Views
481
3DDave
3DDave
jombfish
  • Locked
  • Question Question
Creo: Reducing File Size for Mastercam
Replies
1
Views
433
looslib
looslib
G
"Edit Definition" option not available for parts of assembly
Replies
1
Views
4K
Geneg
G

Part and Inventory Search

Sponsor

Back
Top